Pool Care Instructions Full Mosaic Tile

Glass mosaic pools are considered one of the highest quality and most durable swimming pool finishes available. Premium mosaic systems such as Ezzari, Leyla Mosaic, and products distributed through Europe Imports are specifically designed for submerged applications and offer exceptional longevity, colour stability, resistance to UV exposure, and low porosity when properly maintained.

Like any premium pool finish, mosaic tiles and grout require ongoing maintenance and balanced water chemistry to preserve their appearance, structural integrity, and warranty compliance.

This document provides general care instructions, maintenance recommendations, and water chemistry guidelines suitable for residential swimming pools in NSW, Australia.

IMPORTANT NOTICE

Failure to maintain proper pool chemistry and maintenance may result in:

• Calcium scaling

• Grout deterioration

• Tile staining or discolouration

• Efflorescence

• Premature adhesive or grout failure

• Loss of gloss or visual appearance

• Surface etching

• Algae growth

• Waterline buildup

Damage caused by improper maintenance, aggressive water chemistry, poor circulation, neglect, or external environmental conditions is generally not considered a manufacturing or workmanship defect.

RECOMMENDED WATER CHEMISTRY

Maintaining balanced water chemistry is the most important factor in preserving a mosaic tiled pool.

The following levels are generally recommended for mosaic tiled swimming pools in NSW conditions:

Parameter	Recommended Range
Free Chlorine	1.0 – 3.0 ppm
pH	7.2 – 7.6
Total Alkalinity	80 – 120 ppm
Calcium Hardness	200 – 400 ppm
Cyanuric Acid (Stabiliser)	30 – 50 ppm
Salt Level (Salt Pools)	As per chlorinator manufacturer
Phosphates	As low as possible
Water Temperature	Below 32°C preferred

IMPORTANT

• pH above 7.8 significantly increases the risk of calcium scaling on tiles and grout.

• Low pH may cause grout degradation and aggressive water conditions.

• High calcium hardness combined with elevated pH and temperature may result in stubborn mineral deposits.

• NSW coastal regions may experience increased evaporation, salt exposure, and mineral concentration during warmer months.

START-UP PROCEDURE FOR NEWLY FINISHED POOLS

The first 30 days after filling the pool are critical.

During the Initial Start-Up Period:

• Brush the entire pool daily for the first 2 weeks.

• Maintain balanced water chemistry at all times.

• Avoid sudden chemical adjustments.

• Do not allow calcium scale to form.

• Run filtration continuously for the first 7 days where possible.

• Avoid robotic cleaners during the first 2 weeks unless approved.

• Do not use aggressive acid washing procedures.

• Avoid swimming until chemistry is stabilised.

Salt Chlorinators

For saltwater pools, salt should only be added once instructed by your builder or service technician.

Adding salt too early may affect curing materials and grout performance.

DAILY & WEEKLY MAINTENANCE

Daily Recommendations

• Check pool operation and circulation.

• Remove leaves and debris.

• Ensure skimmer baskets are clear.

• Visually inspect the waterline.

Weekly Recommendations

• Test chlorine and pH levels.

• Brush walls, floor, steps, and waterline.

• Vacuum pool if required.

• Empty pump baskets.

• Inspect grout joints for unusual staining or buildup.

• Check filtration equipment.

Monthly Recommendations

• Perform a full professional water test.

• Inspect calcium hardness and stabiliser levels.

• Check for early signs of scaling.

• Clean filters according to manufacturer specifications.

WATERLINE CLEANING

The waterline area is the most common location for:

• Sunscreen buildup

• Body oils

• Calcium deposits

• Dirt accumulation

• Mineral staining

Regular cleaning is essential.

Recommended Cleaning Methods

Use:

• Soft cloths

• Non-abrasive pool sponges

• Nylon brushes

• Plastic scourers suitable for pool tiles

• pH-neutral cleaners approved for mosaic tiles

Avoid:

• Metal brushes

• Steel wool

• Harsh abrasive pads

• High-strength acid cleaners

• Undiluted hydrochloric acid

• Pressure washing directly onto grout joints

Calcium Scale Removal

If white or grey calcium buildup appears:

• Clean as early as possible.

• Consult a professional pool technician.

• Test and rebalance water chemistry immediately.

• Use only approved scale removal products suitable for glass mosaics and epoxy/cement grout systems.

Heavy calcium buildup may require professional treatment.

CHEMICAL HANDLING GUIDELINES

Incorrect chemical application can permanently damage mosaic finishes.

Always:

• Pre-dissolve chemicals when required.

• Add chemicals separately.

• Keep filtration running during dosing.

• Follow manufacturer instructions.

• Store chemicals safely and dry.

Never:

• Broadcast granular chemicals directly onto steps or benches.

• Allow undissolved chemicals to sit on the pool floor.

• Mix chemicals together.

• Add acid and chlorine simultaneously.

• Overdose pool chemicals.

Chemical staining caused by improper application is not considered a product defect.

SALTWATER POOLS

Saltwater chlorinated pools are suitable for mosaic finishes when properly maintained.

However:

• Salt accelerates mineral concentration through evaporation.

• Salt residue may accumulate around coping and waterline areas.

• Poor chemistry management may increase scaling risk.

Additional care is recommended in coastal NSW environments where airborne salt exposure may already be elevated.

Regular monitoring of:

• pH

• Calcium hardness

• Salt concentration

• Total alkalinity

is essential.

HEATED POOLS & SPAS

Pools and spas operating at elevated temperatures require additional maintenance.

Higher temperatures increase:

• Chemical demand

• Evaporation

• Calcium scaling risk

• Water imbalance potential

Recommendations

• Maintain stricter chemistry control.

• Test water more frequently.

• Keep pH toward the lower end of the recommended range.

• Avoid prolonged overheating.

Spa spillways and waterline areas should be cleaned more frequently due to accelerated mineral buildup.

GROUT CARE

Grout plays a critical role in the structural and visual integrity of a mosaic tiled pool.

To Protect the Grout:

• Maintain balanced water chemistry.

• Prevent calcium scale formation.

• Avoid aggressive cleaning products.

• Avoid pressure cleaning directly onto grout joints.

• Address cracks or hollow areas early.

Minor cosmetic variation in grout colour may naturally occur over time due to exposure, minerals, and pool chemistry.

PREVENTING ALGAE

Even though glass mosaics are highly resistant to staining and algae adhesion, algae may still develop in pools with:

• Poor circulation

• Inadequate sanitisation

• High phosphate levels

• Inconsistent maintenance

Prevention Measures

• Maintain correct chlorine levels.

• Brush regularly.

• Maintain filtration equipment.

• Reduce organic debris.

• Use algaecides only when appropriate and according to manufacturer recommendations.

POOL EMPTYING & DRAINING

Concrete and tiled pools should not remain empty for extended periods unless professionally advised.

Extended exposure may lead to:

• Structural stress

• Tile movement

• Adhesive stress

• Expansion/contraction issues

• Waterproofing concerns

Always consult a pool professional before draining the pool.

GENERAL RECOMMENDATIONS

Recommended

• Professional water testing monthly.

• Professional pool servicing when required.

• Consistent maintenance routines.

• Immediate correction of chemistry issues.

• Use of quality pool chemicals.

Avoid

• Neglecting water testing.

• Long periods of unbalanced water.

• Abrasive cleaning methods.

• Excessive calcium hardness.

• Allowing debris to remain in the pool.

EXPECTED APPEARANCE & NATURAL VARIATIONS

Glass mosaics are handcrafted or batch-produced decorative materials.

Minor variations in:

• Shade

• Reflection

• Tone

• Surface appearance

• Grout pigmentation

may naturally occur and are considered characteristic of mosaic products.

Lighting conditions, water depth, weather, and surrounding finishes may also influence the visual appearance of the pool.

WARRANTY & MAINTENANCE RESPONSIBILITY

The ongoing care and maintenance of the swimming pool water chemistry is the responsibility of the pool owner.

To help preserve the appearance and longevity of the installation:

• Maintain written water testing records where possible.

• Follow professional pool maintenance advice.

• Address chemistry issues promptly.

• Use qualified technicians for repairs or major cleaning.

Failure to maintain recommended chemistry levels may affect applicable warranties from manufacturers, suppliers, installers, or service providers.

RECOMMENDED SERVICE FREQUENCY

Maintenance Item	Frequency
Check water level	Weekly
Test chlorine & pH	Weekly
Brush pool surfaces	Weekly
Vacuum / robotic clean	Weekly
Empty baskets	Weekly
Full professional water test	Monthly
Filter clean/service	As required
Inspect grout & tiles	Quarterly
Professional pool service	Recommended

FINAL NOTES

Premium full mosaic tiled pools are designed to provide exceptional durability, luxury appearance, and long-term performance.

Consistent maintenance and balanced water chemistry are essential to preserving:

• Tile appearance

• Grout integrity

• Surface longevity

• Water quality

• Overall pool performance

With proper care, a full mosaic tiled pool can maintain its beauty and functionality for many years.

GET IN TOUCH FOR MORE INFO